Dishwasher Repairs

Dishwasher problems we see across Cape Town

Dishwashers tend to fail in one of a few predictable ways — dishes coming out dirty, water left standing in the base, or the machine not starting at all. Each points to a different, usually specific part.

Common faults

Not draining — a blocked filter, blocked drain hose, or a failing drain pump, leaving water pooled at the bottom.
Not cleaning properly — blocked spray arm jets, a worn wash pump, or a water inlet issue reducing pressure.
Not filling with water — a faulty inlet valve or float switch stuck in the wrong position.
Leaking underneath — a worn door seal or a cracked hose connection.
Not starting — a door latch not registering closed, or a control board fault.
Unpleasant smell — usually a food debris build-up in the filter, not a mechanical fault at all.

What we can help with

We check the filter, spray arms, pump, and inlet valve, and identify exactly which part is causing the fault before starting any work. Many dishwasher issues turn out to be a blocked filter rather than a failed part.

When repair makes sense

Pumps, valves, and seals are all replaceable parts, so most dishwasher faults are worth repairing. We’ll flag it honestly if the control board or a major component has failed on an older unit where it isn’t worth it.

Cape Town service

We assess and repair dishwashers for homes across Cape Town, with an honest recommendation on whether repair or replacement makes more sense for your machine.

Frequently asked questions

Why is my dishwasher leaving water at the bottom?

Usually a blocked filter or drain hose, or a failing drain pump. We check the filter first since it’s the simplest and most common cause.

Why aren’t my dishes coming out clean?

Often blocked spray arm jets or reduced water pressure reaching the machine. Sometimes it’s as simple as an overloaded rack blocking the spray pattern.

My dishwasher won’t start at all — what’s wrong?

Check the door is latching properly first. If it is, the fault is more likely in the control board or power supply, which we’ll test during the assessment.